Una amplia gama de film de poliéster para productos y soluciones de envasado
Contamos con experiencia en prestar apoyo a fabricantes en el diseño y la funcionalidad de los requisitos de envasado a medida.
Tenemos conocimientos específicos en soluciones de film de poliéster de tapa permanente y desprendible. Se utiliza en el envasado alimentario, como bandejas para platos preparados, cartones para sándwiches o envases con ventana para garantizar la visibilidad del producto envasado por parte del cliente.
Podemos ofrecerle un diseño a medida, logotipos, etiquetado, gráficos e impresión de códigos de barras. También contamos con las acreditaciones y normas necesarias para cumplir todas las normas de seguridad alimentaria y los requisitos de los minoristas sobre envasado de alimentos.
19, 31, 43
Mylar® RL52AF is a biaxially oriented polyester film with an EVA based heat-sealable coating incorporating ant-fog properties on one surface and plain polyester on the other. It is typically used as a heat sealable lidding film for fresh refrigerated foods such as salads, produce and sandwiches. Mylar® RL52AF provides a peelable seal when heat-sealed to APET, CPET, PVC, polyethylene and polystyrene. Seals to polypropylene are only achieved at higher temperatures, so other RL films are recommended. In cooking applications Mylar® RL52AF is not suitable for use in conventional ovens and has temperature limitations when used in microwave ovens. The anti-fog properties minimise fogging during freezing, chilling and cooking and also improves clarity when ‘breathable’ products such as fresh vegetables are packed.
Complies with the following European regulations and directives: EU10/2011 and its amendment 1282/2011 relating to materials and articles intended to come into contact with food.
19, 31, 43
Mylar® RL52 is a biaxially oriented polyester film with an EVA based heat-sealable coating on one surface and plain polyester on the other. It is typically used as a heat sealable lidding film for fresh refrigerated foods such as salads, produce and sandwiches. Mylar® RL52 provides a peelable seal when heat-sealed to APET, CPET, PVC, polyethylene and polystyrene. Seals to polypropylene are only achieved at higher temperatures, so other RL films are recommended. Mylar® RL52 can withstand temperatures as low as -40°C and although the upper melt temperature is 260°C, it is not suitable for all cooking/re-heating applications.
Complies with the following European regulations and directives: EU10/2011 and its amendment 1282/2011 relating to materials and articles intended to come into contact with food.
30
Mylar® RL42 is a biaxially oriented polyester film with an EVA based heat-sealable coating on one surface and plain polyester on the other. It is typically used as a heat sealable lidding film for fresh refrigerated foods such as salads, produce and sandwiches. Mylar® RL42 seals in the range 120°C to 160°C (temperatures above 160°C PVdC, polythene and polystyrene. In cooking applications Mylar® RL42 is not suitable for conventional ovens and has temperature limitations when used in microwave ovens. The anti-fog properties of Mylar® RL42AF minimise fogging during freezing, chilling and cooking and also improves clarity when ‘breathable’ products such as fresh vegetables are packed.
Complies with the following European regulations and directives: EU10/2011 and its amendment 1282/2011 relating to materials and articles intended to come into contact with food.
26, 39
Mylar® OLAF is a biaxially oriented polyester film with a heat-sealable coating incorporating anti-fog properties on one surface and plain polyester on the other. The anti-fog properties minimise fogging during freezing, chilling and cooking and also improve clarity when ‘breathable’ products such as fresh vegetables are packed. Mylar® OLAF provides a strong peelable seal when heat-sealed to itself, APET/CPET trays, polyester coated board, PETG, PVC and polycarbonate. Mylar® OLAF seals between 140° to 220°C, and is ideal for use as a self-venting lidding film for ready meals. Able to withstand temperatures as low as -70°C, Mylar® OLAF may be used in both microwave and conventional ovens where cooking is typically 220°C for 30 mins. When used as a single web, thinner grades of Mylar® OLAF may tear when opening.
Complies with the following European regulations and directives: EU10/2011 and its amendment 1282/2011 relating to materials and articles intended to come into contact with food.
15, 26
Mylar® OL2 is a biaxially oriented polyester film with a heat-sealable coating on one surface and plain polyester on the other. Mylar® OL2 provides a strong peelable seal when heat-sealed to itself, APET/CPET trays, polyester coated board, PETG, PVC and polycarbonate. Mylar® OL2 seals between 140°C to 220°C and is ideal for use as a self-venting lidding film for ready meals. The product can withstand temperatures as low as -70°C and can be used in both microwave and conventional ovens where cooking time is typically 220°C for 30mins. Thinner grades, when used in single web form, may give film tear upon opening.
Complies with the following European regulations and directives: EU10/2011 and its amendment 1282/2011 relating to materials and articles intended to come into contact with food.
31
Mylar® OL13 is a biaxially oriented polyester film with a heat-sealable coating on one surface and plain polyester on the other. The heat-seal surface is capable of sealing to rough or porous surfaces and to trays with preformed creases at the corners. Mylar® OL13 can be heat-sealed to itself, APET/CPET trays and polyester coated board. It seals in the range 140°C to 220°C, reaching full strength in one hour and provides a very strong seal at room temperature which becomes peelable when heated. Ideal for use as a lidding film, dual-ovenable ready meals sealed with Mylar® OL13 can be cooked typically at 220°C for 30mins, yet withstand temperatures as low as -70°C. Mylar® OL13AF has anti-fog incorporated into the heat-seal layer to minimise fogging during freezing, chilling and cooking. It can also be used to improve clarity, when ‘breathable’ products such as fresh vegetables are packed.
Complies with the following European regulations and directives: EU10/2011 and its amendment 1282/2011 relating to materials and articles intended to come into contact with food.
28, 41
Mylar® OL12 is a biaxially oriented polyester film with a heat-sealable coating on one surface and plain polyester on the other. Mylar® OL12 can be used for ready meals, where security of seal at room temperature is required. The product can be heat-sealed to itself, APET/CPET trays, polyester coated board and PVC. It seals in the range 140°C to 200°C, providing a strong seal at room temperature which becomes peelable when heated. Dual-ovenable ready meals sealed with Mylar® OL12 can be cooked at typically 220°C for 30mins, yet withstand temperatures as low as -70°C. Mylar® OL12AF has anti-fog incorporated into the heat-seal layer to minimise fogging during freezing, chilling and cooking. It can also be used to improve clarity, when ‘breathable’ products such as fresh vegetables are packed.
Complies with the following European regulations and directives: EU10/2011 and its amendment 1282/2011 relating to materials and articles intended to come into contact with food.
13, 25, 28
Mylar® OL is a biaxially oriented polyester film with a heat-sealable coating on one surface and plain polyester on the other. Mylar® OL provides a peelable seal when heat-sealed to itself, APET/CPET trays, polyester coated board, PETG, PVC and polycarbonate. Mylar® OL seals between 140°C to 220°C and is ideal for use as a self-venting lidding film for ready meals. The product can withstand temperatures as low as -70°C and can be used in both microwave and conventional ovens where cooking time is typically 220°C for 30mins. Thinner grades, when used in single web form, may tear upon opening.
Complies with the following European regulations and directives: EU10/2011 and its amendment 1282/2011 relating to materials and articles intended to come into contact with food.
30
Mylar® 850AF is a biaxially oriented, co-extruded polyester film with a layer of amorphous heat-sealable polyester film on one surface and plain polyester on the other. Mylar® 850AF is ideal for chilled applications where strong, permanent seals with good ‘seal through contamination’ properties are required. Mylar® 850AF can be heat-sealed to itself, APET/CPET trays, APET coated board, PVdC, PVC, paper and aluminium foil, but not to polyolefins. Excellent ‘hot-tack’ sealing properties can be achieved in the sealing range of 140°C to 220°C.
Complies with the following European regulations and directives: EU10/2011 and its amendment 1282/2011 relating to materials and articles intended to come into contact with food.
20, 30
Mylar® 853 is a biaxially oriented, co-extruded polyester film with a layer of amorphous heat-sealable polyester on one surface and a print receptive treatment on the other. It is normally used as a printed lidding film where strong, permanent seals are required. Mylar® 853 can be heat-sealed to itself, APET/CPET trays, APET coated board, PVdC, PVC, paper and aluminium foil. Excellent ‘hot-tack’ sealing properties can be achieved in the sealing range of 140°C to 220°C. Ideal for use as a lidding film for dual-ovenable ready meals, produce packs and bakery products, it can withstand temperatures from -70°C to 220°C.
Complies with the following European regulations and directives: EU10/2011 and its amendment 1282/2011 relating to materials and articles intended to come into contact with food.
20, 30
Mylar® 852 is a biaxially oriented, co-extruded polyester film with a layer of amorphous heat-sealable polyester on one surface and plain polyester on the other. The heat-sealable surface has a special treatment giving improved handleability for use in high speed sealing lines. Mylar® 852 can be heat-sealed to itself or plain polyester film and gives excellent ‘hot-tack’ sealing properties the range of 140°C to 220°C. Mylar® 852 may also be metallised for use in laminate structures.
Complies with the following European regulations and directives: EU10/2011 and its amendment 1282/2011 relating to materials and articles intended to come into contact with food.
15, 20, 30
Mylar® 850 is a biaxially oriented, co-extruded polyester film with a layer of amorphous heat-sealable polyester film on one surface and plain polyester on the other. Mylar® 850 is normally used where strong, permanent seals are required with good ‘seal through contamination’ properties. It can be heat-sealed to itself, APET/CPET trays, APET coated board, PVdC, PVC, paper and aluminium foil. Excellent ‘hot-tack’ sealing properties can be achieved in the sealing range of 140°C to 220°C. Ideal for use as a lidding film for dual-ovenable ready meals, produce packs and bakery products, it can withstand temperatures from -70°C to 220°C.
Complies with the following European regulations and directives: EU10/2011 and its amendment 1282/2011 relating to materials and articles intended to come into contact with food.